Stairville STAGE-PAR CX-2 RGBAW, User Manual

Page: 29 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘MA’ . Press [OK] . Now you
can select one of the 42 preprogrammed automatic shows. Use the arrow buttons to select a
value between 1 and 42 (display shows ‘P-01’ … ‘P-42’ ).
The auto show can only be activated on the device that works as master.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be configured as
slaves. When the display shows the desired value press [OK] to confirm the selection and then
[M] to return to the parent menu. To return to the parent menu without making changes, press
[M] .
In a master/slave configuration all devices must operate in the 8-channel mode (acti-
vation via DMX mode, ‘SET’ , ‘MODE’ , ‘8CH’ ).
Operating mode ‘Show/Master’
Operating
STAGE-PAR CX-2 RGBAW
29