Stairville STAGE-PAR CX-2 RGBAW, User Manual

Page: 32 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘RED’ , ‘GREE’ , ‘BLUE’ ,
‘AMBE’ , ‘WHIT’ or ‘STRO’ . Press [OK] . Now you can set the brightness of the red, green, blue,
amber or white LEDs each in a range from 0 to 255, or select the strobe rate in a range of 0 to
24.
This mode is also suitable for generating constant or flashing light of a colour mixed from the
five LED colours without DMX control.
When the display shows the desired value press
[OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘DIMM’ . Press [OK] . Now you
can set the dimmer. Use the arrow buttons to select a value between 0 and 255 (display
shows ‘D000’ … ‘D255’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Manual test
Dimmer setting
Operating
LED PAR
32