Stairville D1210T, User Manual

Page: 27 / 36

When setting channel 1, the following channels are automatically addressed consec‐
utively. This addressing may be adjusted as described above.
The unit is operational as soon as power is applied. The activation is done automatically in
‘Power on’ mode and in ‘Manual’ mode using the [Standby] button.
Proceed as follows to adjust the Switch mode:
1.
Open the menu ‘Unit Setup’ , ‘PowerOn’ (see menu overview).
2.
Confirm with the [Menu] button.
ð
The current setting appears on the display.
3.
Select the desired Switch-on mode with the navigation buttons or .
4.
Press the [Menu] button.
ð
The display shows the confirmation prompt ‘Save Changes?’ .
5.
Confirm the prompt with [Menu] to save the new settings. To discard the changes, press
the navigation button to return to the previous menu level.
Switch mode
Operating
D1210T
27