Stairville D1210T, User Manual

Page: 26 / 36

Proceed as follows to set the DMX address:
1.
Open the menu ‘Unit Setup’ , ‘DMX Addr Ch 1 =01’ (see menu overview).
2.
Confirm with the [Menu] button.
ð
The channel number display flashes.
3.
Select the desired channel with the navigation buttons or .
4.
Use the navigation button to change to the set DMX address.
ð
The displayed value flashes.
5.
Adjust the value using the navigation buttons or .
6. Press the [Menu] button.
ð
The display shows the confirmation prompt ‘Save Changes?’ .
7. Confirm the prompt with [Menu] to save the new settings. To discard the changes, press
the navigation button to return to the previous menu level.
Setting the DMX address
Operating
dimmerpack
26