Stairville CLB5 2P RGBWWCompact LED Bar, User Manual

Page: 38 / 68

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Pro’ . Press [Setup] . Now you can select one of
the preprogrammed automatic shows. Use [Up] | [Down] to select a value between ‘Pr.01’ and
‘Pr.30’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 15 basic colours or blackout of all LEDs. Press [Setup] . Use [Up]
| [Down] to select a value between ‘Co.00’ and ‘Co.15’ or ‘OFF’ (blackout).
The following table shows the assignment of the values.
Value Colour Value Colour Value Colour Value Colour
Co.00 Blackout Co.01 Red Co.02 Green Co.03 Blue
Co.04 White Co.05 Amber Co.06 Orange Co.07 Yellow
Co.08 Magenta Co.09 Pink Co.10 Cyan Co.11 Light red
Co.12 Light green Co.13 Light blue Co.14 Warm white Co.15 Cold white
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED lighting set
38