Stairville CLB5 2P RGBWWCompact LED Bar, User Manual

Page: 41 / 68

Press [Setup] . With [Up] | [Down] you can now select one of the following DMX operating
modes:
n
‘4-ch’ (four channels)
n
‘8-ch’ (eight channels)
n ‘10ch’ (ten channels)
n
‘12ch’ (twelve channels)
A sound-controlled show can only be activated when the unit is operating in stand alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Soud’ . Press [Setup] . Press [Up] | [Down] to
activate one of the available sound modes ‘SO.01’ … ‘SO.29’ .
Press [Setup] . Now you can adjust the sensitivity for the sound control. Use [Up] | [Down] to
select a value between 0 (low sensitivity) and 31 (high sensitivity), the display shows ‘SU.00’ …
‘SU.31’ .
Sound control
Operating
CLB5 2P RGBWWCompact LED Bar
41