7.3 Operating on the unit
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
|
[Down]
to change the respectively indicated value. When the display
shows the desired value press
[Mode]
.
If you do not press any key for about 30 seconds, the display will be blanked. It will be reacti‐
vated to display the previously shown menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply.
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode]
repeatedly until the display shows
‘AUTO’
.
Operating mode ‘Automatic’
Operating
CLB5 2P RGBWWCompact LED Bar
37
Summary of Contents for CLB5 2P RGBWWCompact LED Bar
