Assembly Manual
8
Assembly
Step 4: Removing the Main SC
916
Body
4-1
Pull the lower body of the SC916 forward, and with
the assistance of another person lift the machine off
the shipping pallet and on to the floor
(see Figure 6).
Step 5: Removing Covers
Tools
• Phillips screwdriver
5-1
Remove the 6 Phillips screws from the Mid-cover,
and place to the side (see Figure 7).
5-2
Remove the 6 Phillips screws attaching the right and
left side covers and place to the side (see Figure 8).
NOTE:
5 phillips screws are on the left side and 1 screw
on the right side.
Figure 7
Figure 8
Figure 6
