11
ASSEMBLY INSTRUCTIONS
18. GET THE LEFT HAND UPPER COVER,
SLIDE RUBBER GROMMET UP TO THE TOP
OF THE HANDLE ASSEMBLY. POSITION
THE RIGHT HAND UPPER COVER OVER
THE LOWER COVER AND HANDLE POST.
FIT RUBBER GROMMET INTO THE RIGHT
HAND UPPER COVER. POSITION THE LEFT
HAND UPPER COVER OVER THE LOWER
COVER, HANDLE POST. FIT GROMMET
INTO LEFT HAND COVER AND OVERLAP
THE RIGHT HAND UPPER COVER.
NOTE-IF
THE COVERS DO NOT FIT THE HANDLE
NEEDS TO BE ROTATED 180 DEGREES.
HANDLE POST
GROMMET
RIGHT HAND UPPER COVER
LEFT HAND UPPER COVER
19. USE EIGHT PUSH RIVETS TO FASTEN
THE UPPER COVERS TO EACH OTHER ON
BOTH THE FRONT AND REAR
OVERLAPPING SEAMS. IF THE RIVETS
CAN NOT BE PUSHED INTO THE MATING
HOLES USE A MALLET, OR LIGHTLY TAP
WITH A HAMMER.
PUSH RIVETS
