Page 31
MAINTENANCE INSTRUCTIONS
INITIAL SERVICE
Upon receiving your machine, use a soft, clean towel to wipe off the dust
which may have accumulated during shipping. Your new machine will require
minor assembly. Refer to the “Installation Instructions” section for details.
PREVENTIVE MAINTENANCE
Most of these preventive maintenance procedures can be performed after
removing the mid-cover. The preventive maintenance schedule is summarized
in Table 3. The schedule is based on normal usage in a commercial health club
environment; adjust the schedule to meet actual machine usage. Refer to the
“Parts Removal and Replacement” section for all disassembly and assembly
instructions.
Cleaning
1.
DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD
CLEANERS ON THE CONSOLE. Clean the console daily with a water-
dampened cloth and wipe dry after cleaning.
2.
Clean the exterior of the machine daily using soap and water or a
diluted household cleaner such as Fantastic
®
.
3.
Thoroughly clean the entire machine, including the interior, at least
once a week (see Table 3).
Inspecting
1.
Inspect the frame for any rust, bubbling, or paint chips during the
weekly cleaning. The salt in perspiration can damage the unpainted
surfaces.
2.
Inspect the Poly-V belt and HTD belts for excessive wear during the
quarterly lubrication. Adjust the belt tension if necessary.
Summary of Contents for 4000 PT series
