4
Installation
01.2019
21
ba
-o
.1
.8
.0
-en
-3
.1
4.3
Installing trolley on chain hoist
WARNING
Danger from falling parts
There is a danger that an unsecured bolt may become loose and the hoist fall.
➢
Always secure the bolt.
1.
US-G 10 with ST05
Always suspend chain hoist from centre of trolley. See sketch, page 15
US-G 10 with ST10
Fit suspension piece to chain hoist. Note installation position of suspension piece. Fit bolt
(a) and locking plate (b), lock cheese-head screw (c) with medium-strength thread locker
(e.g. Loctite 245), see sketch.
KFN 10/32 with ST10/ST20-ST32; ST50 /ST60 1/1 - KFN 63 with ST50 / ST60 2/1
Fit suspension piece to chain hoist. Note installation position of suspension piece. Fit bolt
(a) and locking plate (b), lock cheese-head screw (c) with medium-strength thread locker
(e.g. Loctite 245), see sketch.
US-G10 with ST05 1/1 ... 2/1
Fig. 13
US-G10 with ST10 1/1
Fig. 14
KFN10/32 1/1 KFN10/32 2/
1
Fig. 15
KFN 63 2/1
Fig. 16
2.
Slide trolley onto runway or push on from below after swivelling the side cheeks up.
3.
Check that screws and nuts are tightened with specified torque, see page 53.
4.
Ensure screws are locked!
Summary of Contents for ST05
Page 1: ...Chain Hoists Original instructions ...
Page 2: ......
