Stahl SHARK 400 Series, Operating Instructions Manual

Page: 49 / 84

Maintenance, overhaul and repair Operating Instructions ET-xx8 / MT-xx8

R. STAHL HMI Systems GmbH / OI_ET_MT-xx8_en_V_01_02_03.docx / 10.03.2021 Page 49 of 84
12.3 Maintenance
The devices are maintenance-free across their entire lifespan.
12.4 Repair
The display and E-box modules cannot be repaired by the customer.

Any repair on the device is to be performed by R. STAHL only.

The modules may be sent back separately.

The modules must be dismounted by qualified staff only (see chapter 3.3 Personnel
qualification ).
12.4.1 Mounting / dismounting the modules
The xx8 SERIES HMIs consist of a display and an E-Box module which are mounted together.
These modules can be replaced for repair purposes.
Dismounting modules:

Disconnect all circuits from the power supply.

Remove cover of terminal boxes.

Disconnect cable and earthing, see Installation Manual "Module exchange xx8
(IM_Module_exchange_xx8)".

Loosen the screws.
Mounting modules:
The steps for mounting the modules are those described in "Dismounting modules" in reverse.
Tightening torque
Screws (in the terminal boxes) connecting the display
and the E-box 10 Nm