General information
Operating Instructions ET-xx8 / MT-xx8
R. STAHL HMI Systems GmbH / OI_ET_MT-xx8_en_V_01_02_03.docx / 10.03.2021
Page 11 of 84
1.5.3.6
RoHS directive 2011/65/EU
Standard
Classification
EN IEC 63000 : 2018
Technical documentation for the assessment
of electrical and electronic products with
respect to the restriction of hazardous
substances
1.5.3.7
FM USA
Standard
Classification
FM Class 3600: 2011
Electric equipment for use in hazardous areas
- general requirements
FM Class 3616: 2011
Dust explosion protection electric equipment -
general requirement
FM Class 3810: 2005
Electric equipment for the operation of
measuring, control and laboratory equipment
ANSI/ISA 60079-0: 2013
General requirements
ANSI/UL 60079-5: 2016
Protection by powder filling "q"
ANSI/UL 60079-7: 2017
Protection by increased safety "e"
ANSI/ISA 60079-11: 2014
Protection by intrinsic safety "i"
ANSI/ISA 60079-15: 2013
Type of protection "n"
ANSI/ISA 60079-28: 2013
Optical radiation “op is”
ANSI/UL 60079-31: 2015
Protected by enclosures "t" (dust)
ANSI/IEC 60529: 2004
Degrees of protection provided by enclosure
(IP code)
1.5.3.8
FM Canada
Standard
Classification
CAN/CSA-C22.2 No. 60079-0: 2015
General requirements
CAN/CSA-C22.2 No. 60079-5: 2016
Protection by powder filling "q"
CAN/CSA-C22.2 No. 60079-7: 2016
Protection by increased safety "e"
CAN/CSA-C22.2 No. 60079-11: 2014
Protection by intrinsic safety "i"
CAN/CSA-C22.2 No. 60079-15: 2016
Type of protection "n"
CAN/CSA-C22.2 No. 60079-31: 2015
Protected by enclosures "t" (dust)
CAN/CSA-C22.2 No. 60529: 2016
Degrees of protection provided by enclosure
(IP code)
CAN/CSA-C22.2 No. 61010-1: 2004
Safety regulations for electric measuring,
control and laboratory equipment - general
requirements
