Stahl Manta GMP 400 Series, Operating Instructions Manual

Page: 4 / 36

Operating Instructions OS-IT-xx9 Table of contents
Page 4 of 36

R. STAHL HMI Systems GmbH / OI_IT_xx9_en_V_01_00_07.docx / 06.12.2019
Table of contents
Description Page
Disclaimer 2
Formatting conventions 3
Warnings 3
Table of contents 4
1 Preface 6
2 Device function 6
2.1 IT-4x9 (SERIES 400 Panel PC) 6
2.2 IT-5x9 (SERIES 500 Thin Clients) 6
2.3 IT-7x9 (SERIES 700 Direct Monitors) 7
3 Technical data 8
4 Conformity to standards 10
5 Identification 10
6 Power supply 10
6.1 HMI devices 10
7 Type code 11
7.1 IT-479-2TX (Panel PC) 11
7.2 IT-579-2TX (Thin Client) 12
7.3 IT-779-DVI0 (Direct Monitors) 13
8 Safety information 14
8.1 General safety information 14
8.2 Cautionary note 14
8.3 Installation safety information 14
8.3.1 Cable glands 15
8.4 Safety information for operation 15
9 Mounting and dismounting 15
9.1 General information 15
9.2.6 GMP device with barcode scanner 18
10 Commissioning 24
10.1 General information 24
10.2 Connections 24
10.2.1 SERIES 400 / 500 24
10.2.2 SERIES 700 26
11 General Information 27
11.1 Touch driver 27
11.2 IT-479 (Panel PC) and IT-579 (Thin Client) 27
11.2.1 Up to Windows 7 operating systems 27
11.2.1.1 Licensing issues 27
11.2.2 Note on Windows Embedded operating systems 27
11.2.3 Windows® 10 IoT Enterprise 2016 LTSB operating system 27
11.2.3.1 Recovery 28
11.2.3.2 Company-specific Windows installations 28
11.2.4 Initial start-up IT-479 (Panel PC) 28
11.2.5 Recovery Stick 28
11.2.6 Back-up 28