Operating Instructions OS-IT-xx9
Technical data
Page 8 of 36
R. STAHL HMI Systems GmbH / OI_IT_xx9_en_V_01_00_07.docx / 06.12.2019
3
Technical data
Function / Equipment
OS-IT-479-2TX
OS-IT-579-2TX
OS-IT-779-DVI0
General information
HMI-type
Operator station
Technology
Panel PC
Thin Client
Direct Monitor
Explosion protection
Application range (Zones)
non-Ex (safe area)
Electrical data
Processor
AMD GX
-222GC
-
Processor details
2.2 GHz; Dual Core, 10W TDP
-
Main memory
4 GB
-
Data memory
64 GB MLC
128 GB MLC
64 GB MLC
-
Graphics controller
integreated AMD Radeon R5E graphics
-
Memory technology
SSD solid state flash drive
-
Operating System
Windows Embedded Standard
7 (64 bit)
Windows 7 Ultimate (64 bit)
Windows 10 IoT Enterprise
2016 LTSB (32 bit and 64 bit)
Windows 10 IoT Enterprise
-
Operating system note
In the case of Windows 7 Ultimate and Windows 10 IoT at the OS-IT-479-2TX devices,
the 64 bit version is pre-installed on the device. Additionally, the 32 bit version of the
respective Windows version is installed on the recovery stick included in the delivery.
Language support
via Windows operating system
-
HMI Image
-
Remote Firmware
-
Input voltage range
85
– 250 VAC
Nominal voltage range
100
– 240 VAC
Frequency range
50 - 60 Hz
Rated operational power
typ. 50 W (170 BTU)
Power consumption AC 1
1 A
Fuses AC
4 AT
Connections
via standard plug
Plug version AC
IEC plug (female)
Plug version USB
USB-A connector
USB-B connector
Note USB
The USB-B slot of the OS-IT-779-DVI0 devices is only equipped if the device has the
touch option (T3) (see type code).
In this case, the USB connection is used to transmit the touch signals to the connected
PC.
Further connections
12 VDC Output
external on / off switch (pre-mounted at enclosure)
Loudspeaker output (optional)
-
Further connections note
Only accessories approved by STAHL HMI may be connected
to the 12 VDC output.
-
Plug version further connections
pluggable screw terminal, green, 6-pin 2.5 mm² (AWG14)
-
Fuses
2x 4A time-lag, 250 V
Ethernet / Data
2x 10/100/1000Base-TX
-
Interface medium
CAT7 Data transmission
-
USB interface
4x USB
-
Interface serial
2x RS-232
-
Interface audio
1 x Audio Line in / out
-
Connection impedance
12 W at 4 Ohm
-
Data cable
CAT7 installation cable AWG23
DVI-I cable
Length of data cable
max. 100 m / [330 ft]
max. 5 m / [16.4 ft]
Minimum requirement connection cable
supply
3 x 1.5 mm² (AWG16)
Minimum requirement connection cable
Ethernet
CAT6
-
Real-time clock
Yes
-
Real-time clock data buffer
Lithium battery and capacitor buffered, maintenance-free
-
Battery type
BR2032
-
Battery buffer
> 5 years
-
Capacitor buffer
at least 4 days
-
