Stahl is pac 9191/20-00-50, Operating Instructions Manual

Page: 17 / 24

english Operating Instructions
Termination module 9191/20-00-50
17
8 Operation
8.1 Operation
• For device operation, observe the information in the "Intended Use" and
"Parameterisation and Commissioning" chapters.
8.2 Troubleshooting
If an error cannot be eliminated:
• Contact R. STAHL Schaltgeräte GmbH. For rapid processing, have the following
information ready:
• Type and serial number of the device
• Purchase information
• Error description
• Intended use (in particular, input and output wiring)
9 Maintenance, oberhaul, repair
9.1 Maintenance
Check the following points in addition to the national regulations:
• Whether the clamping screws holding the electrical lines fit securely
• Whether the device enclosure and/or protective enclosure has/have cracks or other
visible signs of damage
• Whether the permissible temperatures are complied with
• Whether the parts are securely fastened
• Ensure it is being used as intended
9.2 Overhaul
The device does not require regular maintenance.
• Perform maintenance on the device according to the applicable national regulations and
the safety notes in these operating instructions ("Safety" chapter).
9.3 Repair
• Repair work on the device must be performed only by R. STAHL.
10 Returning the Device
• Only return or package the devices after consulting R. STAHL! Contact the responsible
representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally.
or
• Go to the r-stahl.com website.
• Under "Support" > "RMA" > select "RMA-REQUEST".
• Fill out the form and send it. You will automatically receive an RMA form via email. Please
print this file off.
• Send the device along with the RMA form in the packaging to R. STAHL Schaltgeräte
GmbH (refer to chapter 1.1 for the address).