259910 / L40260300020
2017-09-18·BA00·III·en·00
Mounting and installation
15
Linear Luminaire with LED
Series EXLUX L402/2
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Remove the closing cap of the central lock.
• Turn the central lock using a socket wrench M8, wrench size 13, by 90° to the left as
far as it will go.
• Swivel down the translucent cover.
• Proceed in reverse order to close.
• The seal of the translucent cover must lie correctly on the sealing edge.
• Push the closing cap onto the central lock opening (dust protection).
Note:
• Version without switch: Disconnect the luminaire from the power supply and secure it
against being switched on again.
• Version with switch: The luminaire is positively disconnected from the power supply by
actuating the central lock.
• In open end position and with translucent cover swivelled down, a restart lock-out
device prevents the central lock from being actuated.
Please do not use force!
When the translucent cover is closed, the central lock is released.
Opening and closing the reflector plate
15448E00
15451E00
15436E00
15512E00
1 Open the reflector plate by
pressing the safety latch.
2 Swivel down the reflector plate.
• When closing, flip up the
reflector plate and snap it into
place.
165°
170
90°
1
2
Summary of Contents for EXLUX L402/2 Series
Page 20: ......
