Mounting and installation
24
260520 / 640960300090
2018-11-08·BA00·III·en·02
Emergency Luminaire with LED
Series EXLUX 6409/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Connection of remote switch to control gear
8.3.3 Cable entries
The standard luminaire is delivered with 3 lead-in holes, 2 cable glands and 2 stopping
plug.
Please observe the tightening torque for luminaires with installed cable glands and
stopping plugs from R. STAHL Schaltgeräte GmbH.
Luminaires with approved cable glands and stopping plugs; not supplied by
R. STAHL Schaltgeräte GmbH
Please note:
• the required dust resistance!
• the required type of protection!
• the required temperature resistance!
• the IP degree of protection according to the rating plate!
• the operating instructions of the cable glands and stopping plugs!
• the required tightening torques!
• the range of the permissible cable diameter!
Connecting the remote switch to the potential-free contact "Remote switch" of the
control gear.
16333E00
Clamping range:
1.5 mm
2
solid, finely and extra finely
stranded
Stripping length:
8.5 ... 9.5 mm
Tightening torque
Connection thread
Pressure screw
Cable gland 8161
M20 x 1.5
2.3 Nm
1.5 Nm
M25 x 1.5
3.0 Nm
2.0 Nm
Stopping plugs 8290
M20 x 1.5
1.0 Nm
M25 x 1.5
1.5 Nm
WARNING
Cable glands and stopping plugs which are not approved.
Explosion protection is impaired!
• Only use separately certified cable glands and stopping plugs.
Summary of Contents for EXLUX 6409/1 Series
Page 34: ......
