260520 / 640960300090
2018-11-08·BA00·III·en·02
Technical data
11
Emergency Luminaire with LED
Series EXLUX 6409/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Through wiring
Assembly
Control gear
Emergency light
mode
In case of power failure the LEDs are supplied by the battery
Rated operating time at optimal ambient temperature of the battery:
Switchover voltage
from mains to battery operation for U < 0.83 x U
N
from battery to mains operation for U > 0.88 x U
N
Battery set
Version
Gas-tight NiCd battery
Operating voltage
6 V
Capacity
7 Ah
Replacing the battery
set
When opening the battery enclosure, the connection between the battery and
the control gear is disconnected by means of a switch.
The battery set can be replaced after disconnecting the plug-in contacts.
Technical Data
Through wiring Standard luminaire Luminaires are equipped with internal
through wiring. Ingoing and outgoing leads can be connected
to the opposite sides.
Terminals: see techn. data
Wiring cross section: 2.5 mm
2
for max. 16 A.
without
Optional
On the connection side, there are 2 cable entries M25 x 1.5
for ingoing and outgoing wiring of the connection line
(ingoing and outgoing leads on one side).
Standard luminaire
Standard:
2 x M8 insert nuts in the enclosure
Special:
Mounting grooves in the enclosure for use of fastening and
ceiling rails for variable luminaire mounting (variable mounting
distances for luminaires L = 700 mm: 320 ... 480 mm;
L = 1310 mm; 670 ... 930 mm)
Battery
capacity
Rated operating
time
Emergency light output
28 W
52 W
7 Ah
1.5 h
58 %
31 %
3.0 h
27 %
17 %
Summary of Contents for EXLUX 6409/1 Series
Page 34: ......
