Installation Manual Module Exchange ET-/MT-xx8
Legend
Page 4 of 14
R. STAHL HMI Systems GmbH / IM_Module_exchange_xx8_en_V_01_00_02.docx / 09.07.2020
1
Legend
Symbol
Meaning
Component
Sub component
Process step
Process step, subordinate position
Order in which screws are tightened
Direction of movement or position
Process step, order, cut-out position (with or without arrow)
Cut-out, enlarged partial view
Turning movement, turning direction
Important note, must be complied with
2
Tools
1x Phillips screwdriver size 2
1x Torx wrench TX 30
Tools are not included in the delivery and must be supplied by
customer.
3
General information
If not otherwise specified, exchange of modules for devices x38 and
x98 is carried out in the same way.
If the device is installed, connected and in operation on site, the device
must first be taken out of operation.
Then all cable connections must be disconnected. Make sure that the
wires are de-energised !
Disassemble the device and all additional mounting parts !
1
1a
1
1a
13
1
NOTE
NOTE
NOTE
