Manual / Operating Instructions EC-940
Release notes
R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / 23.07.2018
Page 39 of 40
19 Release notes
The chapter entitled "Release Notes" contains all the changes made in every version of the
manual / the operating instructions.
Version 01.00.00
Original version of the manual / the operating instructions
Version 01.00.01
Changes according to development
Version 01.00.02
Addition of section "Cable glands"
Addition of drawing "Ceiling bracket"
Addition of drawing "PoE++ Extender"
Addition of "Connection overwiev" PoE++ Extender
Addition of "Technical data" PoE++ Extender
Addition of certification numbers ATEX, IECEx
Version 01.00.03
Correction terminal labelling in section " EC-940-AFZ camera connections"
Changing of technical data
Deleting
of "contact resistance ≤ 1 MΩ" in section "Connecting conditions" and "Earthing"
Changing cable lenght PoE version
Changing "Conformity to standards"
Changing data into RL 2014/34/EU
Changing section "Instandhaltung, Wartung und Reparatur", Aufnahme von "Reparatur
nur durch Hersteller"
Changing section "Maintenance, overhaul and repair", deleting of sentence with
"flameproof joints"
Addition of "eb" in Ex marking at camera version EC-940-AFZ-HDI-O6H
Addition of sentence with "easily accessible circuit breaker" in section "Installation
–
General"
Adaption of section "RoHS directive 2011/65/EC"
Addition of warning lable "hot surface" in section "Warnings"
Version 01.00.04
Correction typicall coloure at terminal labelling
Adaption of section "Disposal" according to the current WEEE directive
Formal changes
