Mounting and installation
14
227865 / 9185612310
2016-04-15·BA00·III·en·03
Fieldbus Isolating Repeater
Series 9185
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8.1
Dimensions / fastening dimensions
8.2
Mounting / dismounting, operating position
8.2.1 Mounting / dismounting on top hat rail
Mounting
Dismounting
Dimensional Drawing (All Dimensions in mm / inches) – Subject to Alterations
09820E00
15764E00
• Position the device on the top hat rail. Position the cut-out
of the enclosure on the outside edge of the top hat rail.
• Engage the device on the top hat rail.
• When swivelling the device onto the top hat rail,
make sure that it is not set at an angle.
15766E00
• Pull out the base bolt slightly using a screwdriver.
• Swivel out the device.
X
99 mm / 3.90 "
35,2 mm / 1.39 "
122 mm / 4.80 "
114,5 mm / 4.51 "
Dimension X
Screw terminals 108 mm / 4.25 in
Spring cage
terminals
118 mm / 4.66 in
