227865 / 9185612310
2016-04-15·BA00·III·en·03
Engineering
13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Fieldbus Isolating Repeater
Series 9185
6
Engineering
7
Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
• Comply with storage and transport temperatures.
8
Mounting and installation
The device is approved for use in gas explosion hazardous areas of Zone 2 and
dust explosion hazardous area of Zone 22 and in safe areas.
NOTE
Device failure due to high ambient temperature.
Non-compliance can result in damage to the device.
• Make sure that operation of the device is possible within the permissible
temperature range.
DANGER
Explosion hazard due to installation without approved field enclosure!
Non-compliance results in severe or fatal injuries!
• In hazardous areas Zone 2 or 22, the device must be installed in
an enclosure which fulfils the requirements of IEC/EN 60079-15
or IEC/EN 60079-31.
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is
not affected due to external influences, i.e. pressure conditions,
chemical, mechanical, thermal and electric impact such as vibration,
humidity and corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel
who is familiar with the relevant standards.
