Operating Instructions
english
16
Switching Repeater Type 9170/*1
b) Mounting on DIN rails
Set the device on the DIN rail and tilt/snap onto the rail as depicted.
Do not tilt at an angle to either side when snapping onto the rail.
To dismount, use a screwdriver to gently pry up the lock on the
mounting foot and then remove the module.
c) Mounting on DIN rails fitted with a pac-Bus
As depicted in the photo, set the device in position on the pac-Bus
(already mounted on the DIN rail) and tilt/snap until it locks in.
Do not tilt at an angle to either side when snapping onto the pac-Bus.
Note: In order to prevent pole reversal during installation, the pac-Bus
elements have been equipped with a keyed connection plug (see
photo). The module is fitted with a matching slot.
7
Commissioning
7.1
Connections
Types 9170/*1-**-6*
9170/...
/21-11-61
/11-11-61
/21-*0-61
/21-*2-61
/11-12-61
/21-14-61
/21-24-61
/11-14-61
Channel 2
Channel 1
