145290 / 8491602300
2020-04-21·BA00·III·en·04
Mounting and installation
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Signal Horn 105 dB(A)
Series 8491/2
7.3
Installation
7.3.1 Electrical Connection
7.3.2 Replace the front
• Unscrew the four
screws (1).
• Take off the cover plate to
the connection chamber
(do not lose the seal!).
• Remove the cable sheath
over a length of
approx. 35 mm.
• Strip wires over a length
of approx. 7 mm.
• Lead the cable through
the provided passage into
the connection chamber.
• Unlock the screwless
terminal by means of
a screwdriver and
insert wires into the
corresponding clamping
points (2).
• Check wires for tight fit.
• Place seal and cover
plate and seal them
tightly with four screws.
11096E00
11094E00
• Insert the delivered seal.
• Place front on signal horn
and rotate it clockwise
by about 15° (1).
• Screw in screw tightly to
close the signal horn (2).
