129916 / 8018602300
2016-09-27·BA00·III·en·03
Mounting and Installation
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
LED Illuminated Pushbutton
for Panel Mounting
Series 8018/3
7.2.2 Assembly
Single hole mounting
Changing the coloured filter disk
04928E00
• Push the illuminated
pushbutton actuator (1) into the
installation wall (3) and lock it in
position. Ensure that the seal
(2) is seated precisely when
doing so.
• Push the illuminated
pushbutton (1) from the back of
the panel onto the illuminated
pushbutton actuator. Ensure
that the illuminated pushbutton
and lamp actuator (1) are
secured in the installation
wall (3).
• Tighten the illuminated
pushbutton actuator (1) against
the installation wall (3) to which
it is fitted by turning the
threaded nut (4).
(Tightening torque of the
threaded nut: 2.5 Nm)
• Insert coloured filter disk in the
desired luminous colour.
Legend
1 = Illuminated pushbutton actuator
2 = Seal
3 = Installation wall
4 = Threaded nut
11465E00
• Insert a screwdriver
(blade 0.6 x 3.5 form A in
accordance with DIN 5264 or
ISO 2380-1) between the
button and the coloured filter
disk and lever the coloured filter
disk out of its anchoring.
• Remove coloured filter disk.
• Snap in a new coloured filter
disk.
