background image

Transport and storage

14

282892 / 652560300080

2020-12-10·BA00·III·en·01

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Floodlight LED

Series 6525/2

For further technical data, see r-stahl.com.

6

Transport and storage

• Transport and store the device only in the original packaging.

• Store the device in a dry place (no condensation) and vibration-free.

• Do not drop the device.

Mounting / Installation

Cable entry

6525/21..:

1 x cable gland Series CMP A2F

1 x cable gland Series 8161 with red stopping plug  

(Test opening for the restricted breathing test)

1 x stopping plug Series 8290

6525/22..:

1 x cable gland Series CMP A2F

2 x stopping plugs Series 8290

Connection

Spring clamp terminals

Standard: 5-pole: L1, L2, L3, N, PE

with DALI: 7-pole: L1, L2, L3, N, PE, D1, D2

Clamping range:

1x 1.5 to 6 mm

2

 (solid)

1x 1.5 to 4 mm

2

 (finely stranded)

1x 1.5 to 6 mm

2

 (finely stranded with core end sleeves)

(2 free clamping units per pole available)

Loop in/loop out  

wiring

max. 16 A

Optional

DALI-connection

DALI-interface in accordance with IEC 62386-207:2009-08

The maximum permissible voltage drop on the DALI conductor is defined with 

a maximum of 2 V.

This corresponds with a maximum conductor length of 300 m, with a conductor 

cross-section of 1.5 mm

2

.

Technical Data

Summary of Contents for 282303






























Reviews: