13
s
TROUBLE SHOOTING
2000 SERIES OWNER’S MANUAL
! CAUTION !
Improperly mounted cranes can injure people or damage property. These instructions describe installation of a
s
crane on a typical
s
service body. Contact the dealer for other service body/truck chassis
combinations.
! CAUTION !
The truck chassis must be capable of safely supporting the entire chassis, body, crane, other equipment and the
maximum capacity of the crane - 2000 pounds.
The 2000 crane must be installed on a truck chassis with a GVWR of at least 2000 pounds greater than the curb
weight of the complete vehicle. The curb weight is the total weight of the chassis, body, crane, and other
equipment.
The battery should have a minimum capacity of 550 cold cranking amps (CCA) with a 60-amp alternator. It is
recommended that an auxiliary battery with a battery isolator system be used to prevent drainage and prolong
battery life.
! CAUTION !
Never attach, change, or use unauthorized components on your
s
crane. This could result in failure
of the crane (and possible injuries) and voids any warranty or liability
.
! CAUTION !
MOST SERVICE BODIES ARE NOT STRONG ENOUGH TO MOUNT A CRANE!
You must reinforce the compartment and floor before you mount the crane. Get help from the truck dealer or
distributor if the
s
2000 crane is installed on a non-
s
body, in another body/chassis combination or
in a different location. It is recommended that a
s
crane body and outriggers be used with the 2000 crane.
Consult the distributor for the proper body required for your application.
! CAUTION !
Never attach, change, or use unauthorized components on your
s
crane. This could result in failure of the
crane (and possible injuries) and voids any warranty or liability.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com