background image

Instructions 

 

                                                                              

 

6

 
 
 

Fix the rest of the rack, utilising a 
piece of rack to maintain the pitch 

between joints (Fig.5). 
Position the limit switch brackets on 
the rack and, sliding the gate, 
adjust the position of the brackets 

according to the opening and 
closing wanted. Now fix the 
brackets permanently. 

                                                                                                                                                          

 

                                                                        Fig. 5 

                                                                             

                                                                                                                 

Manual manoeuvre: 

To move the gate manually proceed as described below 

(Fig.6):

 

1.

 

Slide the lock cover back 

2.

 

Turn the key clockwise 

3.

 

Pull the handle until it is perpendicular to the motor 

 

 

1

3

 

Fig. 6 

 

 

Regulation of the slowing down mechanical safety device 

 
Loading: 

Keeping the main frame of the motor still with the opposite 
spanner (CH 17 Fig.7) screw the bolt above the loading spring,  

 
Unloading:

 

Follow the same operation only this time screw the bolt in 
the opposite direction (anticlockwise). It is important that 
the regulated force is not too weak, avoiding that any 
anomalies or any foreign bodies on the track stop the 
sliding of the motor.   

            

 

CH 13

CH 17

-

+

Summary of Contents for ACHILLES-1200











Reviews: