4
5
MASTER CONTROL SECTION
1. AUX SEND
This jack socket sends the signals to an auxiliary source.
1. EFF SEND / FT SW (4M4S D MODEL ONLY)
This is a 1/4” jack input for sending EFF output signals. It also can be linked to a foot switch to control
the built-in effects processor.
2. PHONES
This jack socket sends the signals from main output or tape player to the headphones.
3. CTRL RM
These two jack sockets send stereo signals from the master output or an external player to the control
room speakers.
4. REC OUT
These two RCA sockets send stereo signals for recording purposes.
5. 2TK IN
This RCA output receives stereo signals from external players.
6. MAIN (L,R)
These balanced 1/4” (Ø 6.3 mm) jack outputs send balanced line level signals from the mixer to external
devices such as an EQ unit or a power amplifi er. By using a mono jack in the outputs, the outputs
become unbalanced.
7.POWER Indicator
Indicator Indicates the status of the internal DC power supply.
8. Output Level meter
This level meter indicates the signal level of the stereo main output (Left and Right) or play input
(simultaneously with the signal sent to the phones jack).
9. MAIN output control
This slide fader is used for adjusting the fi nal output level sent to the main output sockets.
10. +48V Phantom Power Switch and Indicator
This switch is used for turning on or off +48V phantom power. +48V voltage will be present on the
socket of each microphone input channel when this switch is pressed down.
Important: set all channel faders to minimum before turning on or off. Do not plug or unplug a
microphone after the switch has been turned on. Do not turn on the switch when a dynamic
microphone is in use.
11. AUX SEND
This knob controls the signal level sent to the AUX SEND socket.
12. 2TK TO MIX
The input signal from the 2TK RET sockets can be fed to the main bus when this switch is pressed down.
13. 2TK TO CTRL RM
Press down this button to feed the PLAY signal from an external device to the control room and
headphones; release this button to feed the main signal to the control room and headphones.
