4
5
1. L/MONO - R
These are two unbalanced 2-pole phone
jacks for stereo line input. The input level range is -10dB.
If the source signal is mono please use the left channel.
2. -10dB
Press this switch to attenuate the line input signal
-10dB to fi t a high level signal source.
3A. AUX (4M4S only)
Use this knob to control the signal
level sent from each channel to the AUX bus. It is set before
the channel fader, so it is not dependent on the fader
position.
3B. EFF (4M4S D only)
Use this knob to control the
signal level sent from each channel to the built-in effects
processor. It is set after the channel fader, so it is dependent
on the fader position. Adjust this knob when you use effects
processor on this channel.
4. BAL
The BAL control for the stereo channels determines
the relative volume of the left and right input signals.
5. LEVEL
(Channel Fader)
This rotary fader controls the output level feed to the main
bus from the input channel, adjusting the volume balance
between the channels.
STEREO CHANNEL SECTION
3A
3B
EFF
