7
USER MANUAL
INSTRUCTIONS FOR USE:
First check the available mains voltage (120VAC or 230 VAC). If necessary, change power voltage on your
device with the Voltage Selector (see n°4, page 5). Plug the mains lead into a suitable power socket (see
n°2, page 5). Connect your speaker cabinets a to the output speaker sockets at the rear panel (see n°8,
page 5) with the 10-meter speaker cables supplied. Make sure that the master volume is set to zero before
powering on the amplifier to avoid possible damage to the speakers. Finally, set the MASTER volume to
zero and push the Power Switch to the ON position. The power switch will light up and your PA system is
ready for use. Should you experience any feedback coming from the speakers, first diminish the volume of
each channel in use in order to find & suppress the microphone causing the feedback. Then reposition this
microphone, preferably somewhere behind the speakers, and reset the channel volume accordingly.
IMPORTANT SAFETY INSTRUCTIONS:
1
• Read all instructions carefully
2
• Keep this instruction manual for future reference
3
• Please follow all instructions and heed all precautions as stated
4
• Do not use this apparatus on or near water
5
• Always use a polarized, grounded plug as supplied. A grounded plug has two blades and a third grounding
prong. The wide blade, or third prong, is provided for your safety. Do not compromise the integrity of its safety
purpose by altering or modify this plug in any way. If the provided plug does not fit into your mains outlet,
consult a qualified electrician for replacement of the obsolete outlet.
6
• Protect the power cable from being walked on, particularly at the mains socket or at the point of connection
to the apparatus.
7
• Only use attachments or accessories that are specified by the manufacturer.
8
• Always unplug the device when leaving it unused for an extended period of time, or in the event of a
thunderstorm.
9
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, particularly the plug or power cable, liquids spilled or foreign objects dropped into the apparatus,
or if the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10
• The apparatus should be connected to a mains socket outlet with a protective earthing connection.
11
• The mains plug is used to connect or disconnect the device. By maintaining the apparatus connected to the
mains, it shall remain readily operational.
MARKING & CONFORMITY:
1.
The «C (ETL) US» mark on this product means it conforms to the safety and performance standards
(UL 60065 and CSA C22.2 n°60065:03) accepted throughout the United States and Canada.
2
. The «Crossed-out Wheeled Bin» is to draw your attention on the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus should be collected separately for recycling.
3
. «RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the
use of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead,
Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers
(PBDE).
RoHS
compliant
PA4/200 USA & PA4/200 DSP USA
