Remote control functions:
1:
“BLACK OUT” : Function Exit
2:
“DMX” setup of the fixtures DMX address. Press this button, then press "+” or “
-
”
to increase or decrease between A001
-
A512. Alternatively you can enter the
address with the
numerical keypad (0,1,2,3,4,5,6,7,8,9). The first key press enters
the first number, the second the second number and the third the third number.
For
example: A053 = Button 0, then button 5, and then button 3.
3:
“SLAVE” : This will put the device in SLAVE mode
4:
"AUTO1" & "AUTO2": These 2 buttons are hotkeys to the first two Automatic
Programs in AUTO mode. If you want to select higher programs, use the UP or
DOWN buttons on the remote. You can adjust the run
speed with the SPEED button
(explained below)
5:
“SOUND1” & “SOUND2: These 2 buttons are hotkeys for the two Sound
Controlled Programs. You can adjust the sensitivity of the microphone with the
SPEED button (explained below)
6:
“SPEED”: When the f
ixture is in AUTO mode, this button will adjust the speed of
the selected program. When the fixture is in SOUND mode, this button will adjust the
sensitivity of the microphone.
7:
"R/G/B/W": These buttons can be used to create a user
-
mixed color. Press R(
ed),
G(reen), B(lue) or W(hite) and used UP or DOWN to adjust the level of brightness of
this color. Alternatively, enter a value between 0 and 255 with the numerical buttons.
8:
“STROBE”: When using the fixture in manual color mode, this button activates
the
strobe function. Using UP or DOWN you can adjust the strobe rate from 0
-
20Hz.
9:
“UP” & “DOWN” : These two buttons are used to adjust various parameters
of the fixture.
10:
“0,1,2,3,4,5,6,7,8,9”: These buttons are used to either setup a DMX address
or
enter the brightness value when using manual Color Mixing with the R/G/B/W
buttons.
