Ir
-
Enable/Disable Infrared Receiver
•
Press MENU, then UP or DOWN until "Ir" is displayed, then press ENTER
•
Press UP or DOWN to set the IR receiver to ON or OFF. When ON the unit
can receive commands from the IR
-
REMOTE, when OFF it can not. This
feature works together with Master/Slave mode, so only the Master fixture
should be set to ON and all the Slave fixtu
res should be set to OFF
SLav
-
Master/Slave Setup
•
Press MENU, then UP or DOWN until "SLav" is displayed, then press ENTER
•
"Sla" will now be displayed. Slave mode is selected for this fixture, it will follow
automatic programs, sound mode and fixed color/
atf selection of the Master
fixture it is connected to.
VER
-
Software Version
•
Press MENU, then UP or DOWN until "SLav" is displayed, then press ENTER
•
The current software version is displayed, press MENU to exit.
Infrared remote control
Before using the
IR Remote, always check the following:
1. Please make sure the battery has sufficient charge, if not replace the battery
2. Please confirm the "Ir" setting in the fixture's menu is set to on.
3. Take into account the remote works best at a distance of 1.
5 to 4m
