HOW TO CONFIGURE THE CONSOLE continued
25
HOW TO PERFORM A ZERO RESET continued
6. Troubleshooting the zero reset process if
necessary.
If the zero reset fails, follow these steps:
a. Make sure that fresh batteries are installed in
the power meter.
b. Make sure that the console is paired to the
power meter.
Go to page 21.
c. Make sure that the power meter is in the
vertical position (6 o’clock)
d. Repeat zero reset process on page 24.
7. Use the shortcut zero reset process if desired
Follow the steps below to quickly zero reset the
power meter without having to enter the setup
mode.
a. Rotate the power meter at least one revolution
to ensure that it is awake and ready to com-
municate.
b. Position the power meter vertically (6 o’clock),
and ensure that there is no load on the pedals
and the bike is stable.
c. Activate the console. See HOW TO ACTIVATE
THE CONSOLE on page 11.
d. Press the STAGE button to enter the WARM UP
mode.
e. Press and hold the BACKLIGHT button for 3
seconds.
Note:
The zero reset process will
begin immediately. Ensure that steps a
and b have been completed.
f.
Go to step 5 on page 24.
HOW TO CHANGE DISPLAY SETTINGS
1. Activate the console and select the DISPLAY
menu option.
See HOW TO ACTIVATE THE CONSOLE on page 11.
Then, see HOW TO USE THE SETTINGS MODE
on page 20.
The display menu will appear in the message
banner.
2. Select the UNITS menu option and change the
unit of measurement if desired.
The console can display
speed and distance in
miles (ENGLISH) or
kilometers (METRIC).
The currently selected
unit of measurement will
be displayed with a dark
background.
Select the desired ENGLISH or METRIC unit of
measurement. Then, return to the display menu.
3. Select the KCAL TOGGLE menu option and
change the KCAL / heart rate toggle option if
desired.
In the STAGES mode, when
a heart rate monitor is
paired to the console, KCAL
TOGGLE will flash between
the kcal/hr and heart rate
values every 5 seconds.
The currently selected
toggle option will be
displayed with a dark
background.
