8
2. When the machine is started for 80 seconds, the machine will
detect if there is fluid currently.
3. When the machine has no fluid, the machine takes about 30
seconds to detect. After 30 seconds and there is no fluid,
the machine stops working automatically.
4. After filling the fluid, the “manual fog” button must be turned OFF,
and then turned ON to reset.
Operation
Remote Control Operation ...............................................................
For best result, use VT-1 wired controller.
1. Firmly attach the remote control mechanism to socket (Figure1-G)
on the back of the unit;
2. Plug mains power cord from the machine into appropriate power
supply socket, the red LED upon the controller is lighted;
3. The volume adjustment knob on the controller is with the switch;
4. Turn the knob counterclockwise to the end to switch off, the fog is
off, the green LED upon the controller is lighted;
5. The volume adjustment knob clockwise adjustment volume
increases, counterclockwise adjustment volume reduction, the
green LED upon the controller is blinking;
6. When the machine stops fogging, please do not unplug the
machine immediately, but wait 100 seconds to let the machine
automatically clean the fluid left in the pipe. This is to avoid causing
negative effect when used next time.
