12
Maintenance
Before doing maintenance, please make sure that the power is cut, the
power cord is unplugged, and the machine itself has cooled down.
The maintenance must be done by qualified person.
1.
The fluid is not allowed to get dirty. Be sure to always clean or
replace the caps on the tank (Replace the caps on the tank directly.
This kit includes cap, pipe and filter) and tight the cover of the
Haze
machine tank immediately after filling.
2.
Prolonged use, the nozzle may be clogging by impurities, periodically
use tools to clean the nozzles, keep the nozzle unobstructed.
3.
Prolonged use, please clean the air inlet regularly.
4.
Prolonged use, sponge inside the vent may accumulate oil,
periodically cleaned out or replaced with a new sponge.
5.
Periodically check the connections among the oil tube, the pump
and the heater to see if there’s oil leaking. If positive, lock tight the
connections carefully with proper tool.
6.
PC board should be kept from being dirtied with oil. In case this
happened, dismantle carefully the PCB, and have it brushed
clean both sides with dilute alcohol. Leave it dry itself, then install
it back. Make sure all wires are well connected.
7.
Clean the metal cover with dry cloth.
