18
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a
solution is found. Once the unit operates properly, do not carry out
following steps. If the problem persists, refer servicing to a qualified
technician.
Power Connected but No Snow is Emitted:
1.
Check the power supply. Plug the unit into grounded electric power
supply socket with proper voltage;
2.
LCD display is lit and check if it can operate;
3.
The control panel operation is correct;
4.
Make sure the signal cable polarity is correct and good connection;
5.
Check your controller if in correct connection, test the battery if
power enough for wireless controller;
6.
Check your DMX address setting;
7.
If the pipe connected to the tank is in well condition;
8.
Check the NFB (no fuse breaker) if jump off, if any, please re-press
the breaker to do the reset action;
9.
Keep sufficient fluid in tank.
