11
D.
WIND H/F/A:
Setting of Air volume, there are three changes;
Half =50%, Full=100%, and Auto. Auto is
random effect, interchange of 50% and 100% of
air volume every 2-5 minutes.
E.
Duration:
Setting duration of timing spraying snow
(Duration=10~200s).
F.
Interval:
Setting interval of timing spraying snow
(Interval=20~2000s).
G.
FLUID SCAN ON/OFF:
Setting of automatic inspection of fluid.
1.
When this function is OFF, the machine cannot
inspect volume of the fluid. This means that the
machine will keep working even there’s no fluid.
2.
When this function is ON, the machine starts
this inspection function automatically. Some
points need to be paid attention to:
• The machine cannot draw fluid in the case of
20 to 35 seconds will automatically shut down.
• When the machine detects that no fluid will
stop, the LCD display will show “NO FLUID”.
• If the machine detects no fluid during
operation, the machine stops working. At this
moment, it is allowed to supplement fluid in
the tank and then press button of Manual
ON/OFF or button of Timer ON/OFF to let the
machine enter working status again.
H.Display Backlight Setting:
There are two modes. Long pressing
of the MENU can interchange these two backlight
modes.
1.
Lighted mode:
display appears “
— —FN20— —
”.
2.
Power saving mode:
display appears “
—FN20—
“.
Backlight lights up only when pressed.
Few minutes later light off automatically.
