Quick Introduction to the HE50
Thank you for choosing a Stage Accompany Power Amplifier. Making this choice has guaran-
1
teed you many years of troublefree amplification.
If you have to start using the HE50 straight away and do not have the time to read the complete
manual, make sure that you at least read the following:
•
•
•
•
•
•
Ensure that you have a reliable, well earthed power source. The required current for
the HE50 can be found in the table in paragraph 3.1.
Connect the HE50 to your signal sources via the <INPUT> connectors. Connect this
amplifier to other units via the <LINK> outputs using short signal leads. Connect your
single signal source to the channel 1 input if you use the HE50 in dedicated active presets.
Never make connections to the amplifier or to any preceding equipment with the ampli-
fier switched on!
Switch the HE50 on using the <POWER ON/OFF> switch.
S
For full-range operation at a 4 ohms load or higher please select preset 1 <2500 2500>
For full-range operation at a load below 4 ohms please select preset 2 <2000 2000>
elect the desired preset and input sensitivity by means of the <SELECT ROTATOR >.
The HE50 is now ready for use.
QUICK
INTRODUCT
ION
stage accompany
R
HE50 USER MANUAL
1-1
Important
