ST
AGE CONTROL
stage accompany
R
HE50 USER MANUAL
5-4
HE
Quick configuration
If you have to start configuring your SA High-End Series amp(s) straight away and do not have
time to read the complete manual, make sure that you at least read the following;
;
When you have connected the amp(s) to your network and successfully discovered the amp(s)
via the software, you can open the configuration on the amp by
the appropriate
Launch (
)
>>
amp on your device list. Your opening screen will look similar to the screen below:
Main Window
1.
Main window tab: pressing this tab will show the above window.
2.
X-over tab: clicking on this tab will open the cross-over window.
-
.
3.
Input tabs: clicking on these tabs will open the corresponding input window.
4.
Output tabs: clicking on these tabs will open the corresponding output window.
5.
Preset: choose load or store to manage presets.
6.
Choose a preset or name a preset in these fields.
7.
In the link fields you can check the connection to your amp and the device name.
8.
You can rename the linked amp by entering a new name in this field.
9.
Input/output faders: you can set the input and output levels by sliding these faders with
your pointing device.
10.
You can link adjacent inputs/outputs by engaging this radio button. When engaged the
faders can then be moved simultaneously.
.
11.
The corresponding levels can be read or entered directly in these fields.
12.
Finally each in/out can be muted here individually.
1
2
3
4
5
6
7
8
9
11
10
12
HE
HE
HE
HE
You are free to save your presets to the next available location after the factory presets.
Factory presets are not rewritable.
1
1
