4 Operation
Before plugging the HE50 in, always make sure that the power supply matches the product
Press the MENU button to load the dedicated preset of the currently used loudspeaker
or lock the HE50 please refer to chapter 4.4.3 (page 4-9).
To enable operation of the control panel you first need to unlock the HE50. To unlock
After connection to the correct mains voltage, the HE50 can be switched on using the <POWER
Now the right preset has been loaded you are free to make your own settings.
specification voltage. Install this device on a flat, stable surface, not bend or curved.
system. Rotate the encoder (SELECT button) to search for the desired preset and push the
ON/OFF> switch.
Press the SELECT button to select the input channel you wish to edit. To toggle through the
After a start-up period of a few seconds the LCD display will show the last used preset.
The DSP (loudspeaker management) part of the HE50 offers a wide range of tools for sound
different items, press the SELECT button and rotate the encoder.
system design and setup. These tools can make your system more efficient and better sounding,
but to get the best possible sound it is important to use these tools properly. The following
section explains the various functions of the HE50.
Please note that if your HE50 amplifier is incorrectlly setup you will not be using your
system to its fullest potential and could be harming your speakers.
Always select the right Stage Accompany preset for your SA-system! (see 4.4)
We encourage you to configure the device via PC or MAC program for maximum ease.
Working from the device is possible though.
4
4
.
.
1
2
System check
Input setup
Do not supply power before all components of the system are set up and connected properly.
encoder to select.Load preset by rotating the encoder to YES and pushing the encoder.
OPERA
T
ION
stage accompany
R
HE50 USER MANUAL
4-1
EXIT
EXIT
EXIT
MENU
MENU
MENU
SELECT
SELECT
SELECT
SA HE50
Load: 1
Load Preset ?
2500 2500
2500 2500
NO/yes
You are free to save your presets to the next available location after the factory presets.
Factory presets are not rewritable.
