1 -
1
DS50 USER MANUAL
R
stage accompany
Q
U
IC
K
IN
TR
O
D
U
C
T
ION
1 Quick Introduction to the DS50
Thank you for choosing a Stage Accompany Power Amplifier. Making this choice has guaran-
teed you many years of troublefree amplification.
If you have to start usin g the DS50 straight away and do not have the time to read the complete
manual, make sure that you at least read the following:
•
Ensure that you have a reliable, well earthed power source. The required current for
the DS50 can be found in the table in paragraph 3.1.
•
Connect the DS50 to your signal sources via the <INPUT> connectors. Connect this
amplifier to other units via the <LINK> outputs using short signal leads. Connect your
single signal source to the channel 1 input if you use the DS50 in dedicated active presets.
•
Never make connections to the amplifier or to any preceding equipment with the ampli-
fier switched on!
•
Switch the DS50 on using the <POWER ON/OFF> switch.
•
Select the desired preset and input sensitivity by means of the <SELECT ROTATOR >.
Important
•
For full-range operation at a 4 ohms load or higher please select preset 1 <2500 2500>
For full-range operation at a load below 4 ohms please preset 2 <2000 2000>
The DS50 is now ready for use.
