5-3
DS50 USER MANUAL
R
stage accompany
S
T
A
G
E
C
O
N
TR
O
L
Quick configuration
If you have to start configuring your SA Digital Series amp(s) straight away and do not have
time to read the comp
;
lete manual, make sure that you at least read the following;
When you have connected the amp(s) to your network and successfully discovered the amp(s)
via the software, you can open the configuration on the amp by
Launch (
>>
)
the appropriate
amp on your device list. Your opening screen will look similar to the screen below:
Main Window
5 6 7 8
1
2
3
4
9
10
11
12
1. Main window tab: pressing this tab will show the above window.
2. X-over tab: clicking on this tab will o
-
pen the cr
.
oss-over window.
3. Input tabs: clicking on these tabs will open the corresponding input window.
4. Output tabs: clicking on these tabs will open the corresponding output window.
5. Preset: choose load or store to manage presets.
6. Choose a preset or name a preset in these fields.
7. In the link fields you can check the connection to your amp and the device name.
8. You can rename the linked amp by entering a new name in this field.
9.
Input/output faders: you can set the input and output levels by sliding these faders with
your pointing device.
10. You can link adjacent inputs/outputs by engaging this radio button. When engaged the
faders can then be moved simultaneously.
11. The corresponding levels can be read or entered directly in these fields.
12. Finally each in/out can be muted here individually.
.
