P a g e |
12
P a g e |
12
DOC 001 REV A
DOC 001 REV A
P a g e |
13
THROTTLE COMPONENTS/FEATURES:
LED
Throttle gauge
“zero” position
Throttle gauge
“full” position
Rotation
Throttle grip
Power Switch
◀
◀
◀
◀
◀
◀
◀
◀
◀
◀
Power Switch
(shown in “OFF” Position)
LED → GREEN
LED → YELLOW
LED → RED
Power Switch
(shown in “ON” Position)
RED LED illuminated
(default)
Low-Speed/Power
YELLOW LED illuminated
Medium-Speed/Power
GREEN LED illuminated
Fast-Speed/Power
THROTTLE OPERATION:
(Confirm Speed Mode & Check Battery Level)
Operation of throttle is only for those supervised by an adult. In no circumstances
should a child be allowed to operate the STACYC without proper training and super
-
vision. If the child cannot walk, run, coast and brake, they are surely not ready for
throttle control.
1. Ensure power switch is in “OFF” position, throttle in “zero” position.
2. Install Battery.
3. Power on bike. (Power Switch to “ON” position)
a. Audible Beep.
b. Followed by a light indicator.
c. Light indicates the power mode that is currently selected.
i. RED-Low Speed/Power *factory default
• (training mode)
ii. YELLOW-Medium Speed/Power
• (standard mode)
iii. GREEN-Fast Speed/Power
• (advanced mode)
4. While sitting on the bike, both hands gripping the handlebar, both
feet flat on the ground and ready to ride, turn the throttle slightly, the
lights will show the battery level (twist slowly and a very little amount,
careful to not activate motor!)
a. Green, Yellow, Red lights→indicate full charge
b. Yellow, Red lights→indicate medium-low battery level
c. Red light→low battery level and battery needs to be changed.
◀
◀
◀
