Stack ST8110, User Manual Addendum

Page: 15 / 23

STACK ST8110 Display System Chapter 3. Operating the Display System
User Guide Addendum 9
Alarms
The ST8110 Display System has the following built-in alarms:
Parameter Alarm is triggered
when the:
Gated to RPM
Oil Temperature current value exceeds
the preset value
Yes
Water Temperature current value exceeds
the preset value
Yes
Oil Pressure current value drops
below the preset value
No
Fuel Pressure current value drops
below the preset value
Yes
Battery Voltage current value drops
below the preset value
No
Boost Pressure current value exceeds
the preset value
No
Lap times
The lap time is displayed for eight seconds either when triggered by the
infra-red lap time sensor on passing the lap time beacon or when the
driver presses Switch 4. The popup duration can be changed, or this
popup can be turned off completely using the configuration menu (see
Chapter 4. Configuring the Display System).