TACTICAL GUN REST ASSEMBLY
For mounting the tactical gun rests in the center compartment, first install the
two brackets on the rear wall of the cabinet using (3) type “D” thread forming
screws for each bracket as shown. Notice there is a top to each bracket which
must be in the position shown. This assembly is easier with two people.
Cover each exposed screw thread with
the type “F” caps included in the
hardware bag.
Select a location on the bracket for your
tactical gun rests. Temporarily place the
tactical stock rest as shown to help
determine the height of the gun rest.
You can mount the tactical gun rests now
or after you mount the cabinet to the wall.
NOTE: Some bracket positions may not
be used because of interference with the
mounting screws or top shelf.
Slightly angle the tactical
gun rest upward and hook
the tab into the bracket.
Lower the tactical gun rest so the back
of the rest is flush with the bracket.
Secure the barrel rest to the bracket
with one of the type “C” screws
included in the hardware bag.
Top of
bracket
Thread Forming Screw
40350-1309
27
4
D
D
F
C
