Provisions for the operation
Attaching/taking-off belt clip
Place the grooves of the belt clip on the
guide rails on the upper part of the housing
and slide the belt clip downwards until the
safety catch snaps in.
For removing push the safety catch on
top of the belt clip away from the housing
and slide the belt clip upwards.
Charging the battery packs
The NiMH battery packs are not precharged: Thus, before commissio-
ning the radio sets, the battery packs have to be
completely
charged
(charging time 12- 14 hours). To do so, insert the battery packs into
both radio sets:
Inserting the battery packs
Open the battery compartment at the rear
side of the device and insert the battery
pack by observing the UP-marking. Slide
the cover on the housing and let the safety
catch click into place.
Charging the battery packs
Ensure that both radio sets are switched off!
Plug the power supply unit into a socket
(230 V) and connect it to the charger.
Place the radio sets into the two charging
shafts.
Both control lamps on the charger emit
red light, the battery packs are now being
charged.
Important:
The charging is not stopped
automatically - be sure to terminate the
charging in time in order to avoid over-
charging of the battery packs!
18
