background image

2

‘MPRA’, ‘MPEA’ & ‘MPFA’ SERIES
PUMPS WITH TRAP 

To avoid unneeded service calls, prevent possible injuries, and get the most
out of your pump, READ THIS MANUAL CAREFULLY!

The Sta-Rite ‘MPRA’, ‘MPEA’ & ‘MPFA’ Series Self-priming Centrifugal pump:

• Is designed for use with swimming pools or as a centrifugal pump.

• Is an excellent performer; durable, reliable.

Table of Contents

Safety Instructions  ........................................................................................3

Installation.................................................................................................4-5

Pool Pump Suction Requirements ..............................................................5-6

Electrical....................................................................................................7-8

Operation .....................................................................................................9

Storage/Winterizing .................................................................................9-10

Pump Service.........................................................................................11-12

Troubleshooting Guide ..........................................................................12-13

Repair Parts List .....................................................................................14-15

Warranty.....................................................................................................16

Single Speed Models

HP MPRA

MPEA

MPFA

3/4 MPRA6D-146L, 

MPRA6D-146LC

MPEA6D-146L

MPFA6D-176L

1 MPRA6E-147L, 

MPRA6E-147LC

MPEA6E-147L

MPFA6E-146L

1-1/2 MPRA6F-148L, 

MPRA6F-148LC

MPEA6F-148L

MPFA6F-147L

2 MPRA6G-155L, 

MPR6G-155LC

MPEA6G-155L

2-1/2 MPEAA6G-168L

Two Speed Models

HP MPRA

MPEA

1-1/2 MPRA6YF-174L, 

MPRA6YF-174LS

2

MPEA6YG-175L
MPEA6YG-175LS

2-1/2 MPEAA6YG-168L

MPEAA6YG-168LS

Summary of Contents for DYNA-GLAS

















Reviews: