3
READ AND FOLLOW ALL
INSTRUCTIONS!
This is the safety alert symbol. When you see this symbol on your system
or in this manual, look for one of the following signal words and be alert
to the potential for personal injury.
warns about hazards that
will
cause death, serious personal in-
jury, or major property damage if ignored.
warns about hazards that
can
cause death, serious personal in-
jury, or major property damage if ignored.
warns about hazards that
will
or
can
cause minor personal injury
or property damage if ignored.
NOTICE
indicates special instructions not related to hazards.
Carefully read and follow all safety instructions in this manual and on equip-
ment.
Keep safety labels in good condition; replace if missing or damaged.
Incorrectly installed or tested equipment may fail, causing
severe injury or property damage.
Read and follow instructions in owner's manual when installing
and operating equipment. Have a trained pool professional per-
form all pressure tests.
1. Do not connect system to a high pressure or city water system.
2. Use equipment only in a pool or spa installation.
3. Trapped air in system can cause explosion. BE SURE all air is out of system
before operating or testing equipment.
Before pressure testing, make the following safety checks:
• Check all clamps, bolts, lids, and system accessories before testing.
• Release all air in system before testing.
•
Water pressure for test must be less than 25 PSI (172 kPa).
• Water Temperature for test must be less than 100
o
F. (38
o
C).
• Limit test to 24 hours. After test, visually check system to be sure it is ready
for operation. Remove trap lid and retighten hand tight only.
NOTICE:
These parameters apply to Sta-Rite equipment only. For
non-Sta-Rite equipment, consult manufacturer.
To reduce the risk of injury, do not permit children to use this
product unless they are closely supervised at all times.
